2-kanaliges Aktivmodul mit NCore-Verstärkern mit je 250W an 4 Ohm. Diese könne auch gebrückt werden zu 1x500W an 8 Ohm.
Durch den DSP frei programmierbar, z.B. für 2-Wege Lautsprecher oder kräftige Subwoofer. 3 Presets speicherbar. Analoger, symmetrischer Eingang und Digitaleingänge. Programmierbar über USB.
Lieferung ohne Netzkabel!
Passendes Kabel: Schuko-Netzkabel
Optionale Fernbedienung:
Fernbedienungsempfänger: https://lsv-achenbach.de/shop/product_info.php?products_id=5987
Fernbedienung: https://lsv-achenbach.de/shop/product_info.php?cPath=347_469_699&products_id=5663
Spezifikationen
TThis FusionAmp can be the basis of e.g. a powerful active subwoofer or a two-way monitor.
The FA502 has two 500 Wrms Ncore® amplifiers which can also be bridged to form one powerful 1000 Wrms amplifier.
Dimensions: 380 * 150 x 90 mm
Weight: 2150 gram
Connections
-
Analogue balanced XLR in and through
-
Analogue unbalanced RCA input
-
Digital AES in and through
-
Digital S/PDIF in and through
-
Digital Optical TosLink input
-
USB 2.0 configuration interface
Features
-
15 biquads per amplifier
-
Three selectable presets for filters
-
Source selection
-
Signal detect
-
Auto shutdown
-
BTL capable
-
Clip protect
-
Thermal protect
-
Filter protection
Chip specification:
-
DSP: ADAU1450 using external ADC and DAC
-
ADC: 192kHz 24-Bit Enhanced Dual Bit ADC
-
SRC: AES/EBU - S/PDIF 192kHz 24-bit
-
DAC: AK4454 768kHz 32-bit
DSP Filters:
-
15 biquads per amplifier.
-
A one-way Fusion Amp has 15 biquads,
-
A two-way has 2x15 biquads
-
A threeway has 3x15 biquads.
-
Amplifiers configured in BTL still have 15 biquads available.
Maximum delay:
19,2ms per amplifier.
Sample frequency:
Supported digital sampling rates Fs 32, 44.1, 48, 88.2, 96,192 kHz
All input rates are converted to 93.75kHz
Input latency:
Analogue input approximately 350uS.
Digital input 1,8mS @ 96kHz input sample rate.
Performance:
MBW=20kHz (20Hz-20Khz), unweighted, all filters set to unity, gain adjust 0dB, unless otherwise specified.
SNR AD/DA -109dB
SNR DA -111dB
THD(D+N) (at -1dBFS) AD/DA -100dB
THD(D+N) (at -1dBFS) DA -102.5dB
Detailed information: https://www.hypex.nl/img/upload/doc/plate_amp/FusionAmp_00xx.pdf